LEXUS SC430 (02-10) MOTOR MOUNT SPACERS - SAFELY LIFTS MOTOR 10MM ABOVE SUBFRAME

Description

--->LEXUS SC430 MOTOR/DRIVELINE SPACER KIT<---
P/N: MCP_MMSP00 Rev. AE
Compatible Vehicles:
-Lexus SC430 [2002-2010]
If you are one of the many Lexus enthusiasts with a lowered (or straight up SLAMMED) suspension and have had past experience with the dreaded "Dented Oil Pan" caused by tall speed bumps, deep potholes, or debris in the road or the highway that was unavoidable then you are aware of the potential engine damage that can result from a dented pan.  For those who have not had any experience with a dented oil pan, just ask anyone who knows and they will tell you, the problems can be very extensive and very expensive!
This kit IS THE ANSWER to helping you protect your lowered vehicle's undercarriage from damage due to "bottoming", "scraping", obnoxious speed bumps, and huge potholes.
A dent to your oil pan, even a minor one, in the right place has the potential to cause the VVT-i system to malfunction and can even ruin your motor by obstructing the oil flow at the oil sump inlets which are very close to the bottom of the oil pan.
The motor mount spacers are 10mm thick with slots that fit around the motor mount studs.  The motor mount spacers are machined from high quality 6061-T6511 Aluminum alloy.
The spacers raise the motor 10mm (just above above the subframe) offering protection from bottoming and scraping.
The transmission spacers are 7mm thick and machined from high quality SUS303 stainless steel alloy.  They mount around the transmission mounting studs (4 total), in between the top of the transmission crossmember brace and the mounting stud bushings.
The transmission spacers help maintain the proper joint angles in the driveline, preventing binding from misalignment in the driveline joints.
There is no need for differential spacers, this kit is all you need and comes with detailed instructions and an exploded diagram for an easy install.
***NOTE:    Special care must be taken when installing this spacer kit.  Be sure TO READ THE INSTALLATION INSTRUCTIONS AND FOLLOW THEM WITHOUT DEVIATION.
Failure to do so could result in damage to your vehicle and lifetime warranty voided.
All warranty claims require original packaging to be sent back along with the failed part, failure to produce original packaging and failed parts will result in denial of warranty claim.
If you have any questions, please feel free to contact me!