KZYEE KM50 12V 24V Auto Circuit Tester Electrical Power Probe Kit AC DC Injector

Description

Store category
Sign Up Now !
You may also like
KZYEE KM50 12V 24V Auto Circuit Tester Electrical Power Probe Kit AC DC Injector
Product Description
The
KZYEE KM50 Power Scan kit
is the most revolutionary circuit tester to date, which works off of
12-24 Volt
sources, featuring
DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit Detection, Resistance, and Diode
Especially, in
AC Voltage, Frequency, Duty Cycle,
and
Fuel Inject Modes
, users can long-press the mode button to switch between
Waveform Display Mode
and
Digital Display Mode
. The power scan is indeed the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician who is looking for a fast and accurate solution to electrical systems diagnostic.
TIPS:
1.KM50 is ONLY for
12-24V
vehicle battery electrical systems, and should
NOT
be used to test
110/220V
household electric appliances; or, it will be damaged.
2. The LED and LCD pull no more than
100 milliamps
of current, therefore when using this device as a test light or multimeter, it is safe for computers and airbags.
3.When powering-up components, you can increase the life of rocker switch in the tool if you first press the switch, and then contact the tip to the component. The arcing will take place at the tip instead of the metal contacts of the rocker switch.
Activating Components
In Your Hand or In The Vehicle
With a flip of the power switch, you have a hot instant/grounding for voltage & polarity testing. It powers up components such as windows, lights, starters, wipers, and so on. Simultaneously uses the hot lead and the ground wire to activate elements right in your hand.
What’s new in KM50 Circuit Tester Kit?
New Testing mode: Fuel Inject Mode.
New Testing mode: Frequency Mode.
New Testing mode:Duty Cycle Mode
.
Digital & waveform displays in 4 testing modes.
More diagnostis informations in each testing modes
Short-circuit protected
Buzzer is swichable.
LED light is switchable.
Product Specifications
Supply Voltage: 8V DC ~ 30V DC；Frequency: 0Hz ~ 1Mhz
DC/ AC Voltage Test: -110V ~ 110V
Duty Cycle: 0.0~100.0%；Rating Current: 1A~8 A
Fuel Injection:Voltage: 0~180V, Time: 0~25ms
NEW FEATURES
Fuel Inject Mode
Fuel Inject Mode is specifically set-up for fast and easy injector circuit diagnosis.
One quick connection to the circuit and the KM50 will display all the needed fuel injector testing information.
To reset the maximum and minimum values, press the mode button twice.
In this mode, if it fails to detect a valid injection pulse, a bar symbol will display
instead.
Frequency Mode
Press mode button to enter the menu and short short press the down button to
place the cursor in the frequency mode, and short press the mode button to enter
the frequency waveform display mode.
The LCD display will show the
min frequency, max frequency and display the signal waveform in real time.
Duty Cycle Mode
Press mode button to enter the menu andshort press the down button to
place the cursor in the Duty Cycle mode, and press the mode button to
switch it to waveform display.
The LCD display will show the min
duty cycle, max duty cycle, and display
the signal waveform in real time.
UPDATED FEATURES
DC Voltage Mode
DC mode is for testing DC (direct current) voltages. Voltage testing is as easy as contacting the probe tip to a circuit and reading the display.
DC Mode is the mode that the KM50 can supply battery power or ground by pressing the rocker switch.
AC Voltage Mode
The auxiliary ground wire is connected to one end of the circuit under test, and the probe contacts the other end of the test circuit. The LCD will display the max and mini voltage value, and display the signal waveform in real-time. You can adjust the sampling frequency by pressing the Up/Down Button.
Resistance Testing Mode
The probe contacts one end of the measured resistance, and the auxiliary ground lead is connected to the other end of the measured resistance. The LCD will display the resistance between the tip and auxiliary ground lead.
When resistance value is less than 30Ω, the instrument buzzer will alarm and the green LED will light.
This function can be used as continuity test.
Diode Testing Mode
Contact the probe tip to diode positive terminal, connect the auxiliary ground lead to the diode negative terminal, the screen will display the forward voltage drop, which indicates forward bias. If swapping the probe tip with auxiliary ground lead, the screen will not display voltage, which indicates reverse bias.
It also displays the max and mini values during measurement.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept
PayPal
payment.
Please contact us if you need to use another method to pay.
Payment should be made within
3 days
after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
We are not responsible for buyers’ local taxes.
Please include your special requests in eBay note if there is any.
Delivery details
Order will be shipped within
1 business
day
after payment confirmed via
UPS or USPS or FedEx Ground
from our
wa
rehouse
in
United
S
tate
.
Delivery time varies from
2 to 6
business days.
We will ship according to your
EBAY
address
.
Please make sure it’s correct and include
phone number
for delivery.
If you do not receive your order in the estimated time, please contact us.
Terms of sales
12 months
free repair for the devices.
3 months
for the accessories.
Items should be returned on buyers’ cost for repair or replacement.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in
7 days
and keep it
unused
.
We will instruct you on how to return and get refund or replacement.
If after 7 days, or the item has been used, we have the right to decline your claim.
About us
Who We Are?
We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years.
What Do We Have?
We have office and warehouse in Australia and US to ensure fast shipment and after-sale service.
We have more than 50 employees devoting to customer satisfaction.
Contact us
Our customer-oriented service strives for positive feedbacks
with all 5 star selling ratings.
Please feel free to contact us via eBay message once you have any question.
We will reply in 24 business hours.
Business time:
GMT8 (9:00-18:00) from Monday to Friday.