6 In. Dia Keepa Vent an Aluminum Roof Vent for Flat Roofs

Description

Aluminum roof vent best for low slope or flat roof ventilation
Can be used as both air intake or exhaust
UL Certified & tested to withstand wind pressure speeds 200+ mph
Active Ventilation Products Keepa vent will alleviate moisture in the winter and heat in the summer to extend the life of the roof and building structure. The Keepa vent is best used for flat roof attic spaces as an exhaust roof vent or fresh air supply intake roof vent. Made of corrosion resistant aluminum, the Keepa vent has a round concentric vent cap and standard 11 in. collar height, square flange and an inner louver wildlife guard. The vent cap is a manufactured one piece spun round aluminum cap that prevents rain and snow from entering the vent. The vent cap is removable to allow access for an easy rubber boot installation for membrane roofs. The 11 in. standard collar is excellent for locations that accumulate high levels of snow falls and the round design is aerodynamic to with stand wind speeds up to 200 mph. The Keepa vent has proven to be an excellent and economical choice for a flat roof application.
Best used for flat roof attic ventilation
Model KV-6 has aluminum 12 in. x 12 in. flat square flange
3 in. flashing
Net free air space: 28 sq. in. (0.19 sq. ft.)
Pitch capacity range: 0/12 to 12/12
Ventilation rule 1:300: One vent per 100 sq. ft.
Built-in inner vertical louver cylinder that keeps out insects, birds, and animals while allowing air to move through the vent without resistance
Built-in inner vertical louver cylinder has a 1/8th in. opening between the louver blades and all aluminum ("noncombustible") material meets the requirements of California building code 706A.2 vents to resist the intrusion of burning embers and flame through ventilation openings
5-year warranty